6ick6
Posts : 4 Join date : 2011-06-13
| Subject: Oil Pressure sensor install Tue Aug 30, 2011 2:15 pm | |
| Hi guys, any best way to wire in the oil pressure sensor?
I know it uses the J1C02. Do I simply run a wire from sensor to that pin and use a common ground or can I tap into an existing wire in the harness?
| |
|
Admin Admin
Posts : 258 Join date : 2008-02-22
| Subject: Re: Oil Pressure sensor install Tue Oct 25, 2011 10:12 am | |
| - 6ick6 wrote:
- Hi guys, any best way to wire in the oil pressure sensor?
I know it uses the J1C02. Do I simply run a wire from sensor to that pin and use a common ground or can I tap into an existing wire in the harness?
You want to use an existing SENSOR ground, and existing 5v reference. You can piggy back as many sensors as you need to these wires. | |
|