ProEFI

Electronic Fuel Injection Discussion Forums
 
HomeFAQSearchRegisterUsergroupsLog in

Share | 
 

 CAN Gauge VQ35DE

View previous topic View next topic Go down 
AuthorMessage
Glex25



Posts : 1
Join date : 2008-02-27

PostSubject: CAN Gauge VQ35DE   Thu Mar 06, 2008 10:43 am

When will it be available?
What features can be controlled from it apart from Antilag, Boost?
2-Step RPM Change?
Back to top Go down
View user profile
IIQuickSilverII



Posts : 6
Join date : 2008-03-06
Age : 37
Location : AZ

PostSubject: Re: CAN Gauge VQ35DE   Thu Mar 06, 2008 10:52 am

as far as i know its available already.. the bigger version will be available later this year
Back to top Go down
View user profile http://www.intensepower.com/jolotu35.html
Pro EFI
Admin


Posts : 8
Join date : 2008-02-22
Age : 47

PostSubject: Re: CAN Gauge VQ35DE   Thu Mar 06, 2008 6:27 pm

Glex25 wrote:
When will it be available?
What features can be controlled from it apart from Antilag, Boost?
2-Step RPM Change?

The 52mm gages are available. Feature content is still in developement for the gage, the basic settings you will be able to adjust through the gage are hi/low octane switch (which will change timing and boost), boost targets, Limiter changes, and the more simple things like that.

ProEFI
Back to top Go down
View user profile
is300lex



Posts : 5
Join date : 2008-04-03

PostSubject: Re: CAN Gauge VQ35DE   Sat Apr 19, 2008 9:28 pm

Pro EFI wrote:
Glex25 wrote:
When will it be available?
What features can be controlled from it apart from Antilag, Boost?
2-Step RPM Change?

The 52mm gages are available. Feature content is still in developement for the gage, the basic settings you will be able to adjust through the gage are hi/low octane switch (which will change timing and boost), boost targets, Limiter changes, and the more simple things like that.

ProEFI

would be great to adjust boost w/o the need for a ebc boost controller, or activate 2step etc.. Would get rid of alot of electronics in my car thats for sure which is great!

Btw the gauge itself looks outdated IMO, will there a more modern looking gauge later on? With maybe full color?
Back to top Go down
View user profile
IIQuickSilverII



Posts : 6
Join date : 2008-03-06
Age : 37
Location : AZ

PostSubject: Re: CAN Gauge VQ35DE   Sat Apr 19, 2008 9:50 pm

i think it looks pretty good....why would u want a color one? if youa re looking for looks, or something like that id check the PLX gauges...Smile
Back to top Go down
View user profile http://www.intensepower.com/jolotu35.html
ND4SPD



Posts : 9
Join date : 2008-03-24
Age : 43

PostSubject: Re: CAN Gauge VQ35DE   Sun Apr 20, 2008 12:08 pm

I can't wait to get the CAN Gauge into my Supra... my ProEFI is in and running, but it'd be nice to be able to get rid of my separate boost controller and be able to do the hi/low octane switching. Smile

Is the CAN gauge controlled completely by the ProEFI or does it have a separate processor and software?
Back to top Go down
View user profile
is300lex



Posts : 5
Join date : 2008-04-03

PostSubject: Re: CAN Gauge VQ35DE   Sun Apr 20, 2008 1:00 pm

IIQuickSilverII wrote:
i think it looks pretty good....why would u want a color one? if youa re looking for looks, or something like that id check the PLX gauges...Smile

Why a color display? well it is 2008 Smile

If one were to get the can gauge with its current ability how will upgrades work if more features become available?
Back to top Go down
View user profile
is300lex



Posts : 5
Join date : 2008-04-03

PostSubject: Re: CAN Gauge VQ35DE   Mon May 12, 2008 11:54 am

btw is the can gauge currently unavailable?
Back to top Go down
View user profile
gbennett



Posts : 25
Join date : 2009-04-24

PostSubject: Re: CAN Gauge VQ35DE   Fri May 01, 2009 4:54 am

Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?
Back to top Go down
View user profile
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: CAN Gauge VQ35DE   Wed Jun 03, 2009 8:25 am

gbennett wrote:
Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?

You will be able to monitor the sensors going to the engine, as well as some calculated ones like injector duty, spark advance , etc... You will also get fault codes displayed in the gauge.

Things you will be able to change are

Traction control On/Off
O2 Feedback On/Off
High Low Octane On/Off
Nitrous stages 1 through 4 Armed/Disarmed
Two Step RPM increment/decrement by 100rpm
Two Step target boost increment/decrement by 5kpa

Some features may be added in the future as well.
Back to top Go down
View user profile http://proefiforum.forumakers.com
kaptain86



Posts : 7
Join date : 2009-09-07

PostSubject: Re: CAN Gauge VQ35DE   Tue Sep 08, 2009 4:42 pm

Admin wrote:
gbennett wrote:
Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?

You will be able to monitor the sensors going to the engine, as well as some calculated ones like injector duty, spark advance , etc... You will also get fault codes displayed in the gauge.

Things you will be able to change are

Traction control On/Off
O2 Feedback On/Off
High Low Octane On/Off
Nitrous stages 1 through 4 Armed/Disarmed
Two Step RPM increment/decrement by 100rpm
Two Step target boost increment/decrement by 5kpa

Some features may be added in the future as well.

Any updates on all the capabilities of the current can gauges?
Back to top Go down
View user profile
stugot5



Posts : 4
Join date : 2009-10-03

PostSubject: Re: CAN Gauge VQ35DE   Sat Oct 03, 2009 9:17 pm

is there any type of manual that we can download for operating the CAN gauge?
Back to top Go down
View user profile
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: CAN Gauge VQ35DE   Mon Oct 05, 2009 8:19 am

kaptain86 wrote:
Admin wrote:
gbennett wrote:
Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?

You will be able to monitor the sensors going to the engine, as well as some calculated ones like injector duty, spark advance , etc... You will also get fault codes displayed in the gauge.

Things you will be able to change are

Traction control On/Off
O2 Feedback On/Off
High Low Octane On/Off
Nitrous stages 1 through 4 Armed/Disarmed
Two Step RPM increment/decrement by 100rpm
Two Step target boost increment/decrement by 5kpa

Some features may be added in the future as well.

Any updates on all the capabilities of the current can gauges?

No changes to the capabilities as of yet. We are still sorting out a few bugs with the tuning menus. We are hoping to have that release soon. It will require a firmware update to the ECU to be performed by your dealer.
Back to top Go down
View user profile http://proefiforum.forumakers.com
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: CAN Gauge VQ35DE   Mon Oct 05, 2009 8:21 am

stugot5 wrote:
is there any type of manual that we can download for operating the CAN gauge?

No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it.
Back to top Go down
View user profile http://proefiforum.forumakers.com
kaptain86



Posts : 7
Join date : 2009-09-07

PostSubject: Re: CAN Gauge VQ35DE   Mon Oct 12, 2009 4:35 pm

Admin wrote:
stugot5 wrote:
is there any type of manual that we can download for operating the CAN gauge?

No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it.

I played around with mine for a little bit when I test drove my car last thursday, I can take some video of it when I get my car back (should be in a few hours that I get it back then sometime will get video of it in action)
Back to top Go down
View user profile
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: CAN Gauge VQ35DE   Tue Oct 25, 2011 10:18 am

kaptain86 wrote:
Admin wrote:
stugot5 wrote:
is there any type of manual that we can download for operating the CAN gauge?

No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it.

I played around with mine for a little bit when I test drove my car last thursday, I can take some video of it when I get my car back (should be in a few hours that I get it back then sometime will get video of it in action)
Keep us posted.
Back to top Go down
View user profile http://proefiforum.forumakers.com
kaptain86



Posts : 7
Join date : 2009-09-07

PostSubject: Re: CAN Gauge VQ35DE   Tue Oct 25, 2011 10:27 am

Admin wrote:
kaptain86 wrote:
Admin wrote:
stugot5 wrote:
is there any type of manual that we can download for operating the CAN gauge?

No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it.

I played around with mine for a little bit when I test drove my car last thursday, I can take some video of it when I get my car back (should be in a few hours that I get it back then sometime will get video of it in action)
Keep us posted.

http://www.youtube.com/watch?v=5s___abzN4A

http://www.youtube.com/watch?v=unohHzb-L1s

I haven't gone through all the selections of it but it at least shows start up.
Back to top Go down
View user profile
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: CAN Gauge VQ35DE   Tue Oct 25, 2011 10:36 am

Nive videos!
Back to top Go down
View user profile http://proefiforum.forumakers.com
Sponsored content




PostSubject: Re: CAN Gauge VQ35DE   

Back to top Go down
 
CAN Gauge VQ35DE
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» temp gauge wiring
» FAQ: Aeroforce Interceptor Scan Gauge
» Gauge cluster not working
» Stack Racing Gauge Cluster for 99-04 Mustangs
» Aeroforce Scan Gauge Question (Series I SC)

Permissions in this forum:You cannot reply to topics in this forum
ProEFI :: ProEFI Forums :: Products :: Displays-
Jump to: