ProEFI

Electronic Fuel Injection Discussion Forums
 
HomeFAQSearchRegisterUsergroupsLog in

Share | 
 

 ProEFI and External 2-Step (i.e. Phillip Long 2-Step)

View previous topic View next topic Go down 
AuthorMessage
ND4SPD



Posts : 9
Join date : 2008-03-24
Age : 43

PostSubject: ProEFI and External 2-Step (i.e. Phillip Long 2-Step)   Sat Aug 16, 2008 11:57 am

I have the ProEFI, and also my Phillip Long 2-Step is still hooked up (as far as I know). I'm not super familiar with how the PL 2-Step achieves its secondary rev-limit electronically. So, I'm wondering if using it with the ProEFI is going to create problems. When used with the stock ECU it usually causes the MIL to flash. I'm just wondering if it's going to cause the ProEFI to throw a code (or if it simply won't work).

By the way, yes, I know the ProEFI has built-in 2-Step, but since neither the CAN gauge nor the end-user software is out yet, I have no way of setting or engaging the ProEFI 2-Step. Thanks in advance.
Back to top Go down
View user profile
 
ProEFI and External 2-Step (i.e. Phillip Long 2-Step)
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» 1962 4x4 CHEVY 350 STEP VAN
» 1971 Olson Kurbmaster Jr Step-Van Semi-Custom - $8500 (Dayton, Ohio) FOR SALE
» Write-Up: AC Compressor & Clutch Replacement
» installing a bypass (On/Off) switch onto an External speaker
» 58 step van

Permissions in this forum:You cannot reply to topics in this forum
ProEFI :: ProEFI Forums :: Applications :: Toyota/Lexus/Scion-
Jump to: