| CAN Gauge VQ35DE | |
|
+5ND4SPD is300lex Pro EFI IIQuickSilverII Glex25 9 posters |
Author | Message |
---|
Glex25
Posts : 1 Join date : 2008-02-27
| Subject: CAN Gauge VQ35DE Thu Mar 06, 2008 10:43 am | |
| When will it be available? What features can be controlled from it apart from Antilag, Boost? 2-Step RPM Change? | |
|
| |
IIQuickSilverII
Posts : 6 Join date : 2008-03-06 Age : 44 Location : AZ
| Subject: Re: CAN Gauge VQ35DE Thu Mar 06, 2008 10:52 am | |
| as far as i know its available already.. the bigger version will be available later this year | |
|
| |
Pro EFI Admin
Posts : 8 Join date : 2008-02-22 Age : 53
| Subject: Re: CAN Gauge VQ35DE Thu Mar 06, 2008 6:27 pm | |
| - Glex25 wrote:
- When will it be available?
What features can be controlled from it apart from Antilag, Boost? 2-Step RPM Change? The 52mm gages are available. Feature content is still in developement for the gage, the basic settings you will be able to adjust through the gage are hi/low octane switch (which will change timing and boost), boost targets, Limiter changes, and the more simple things like that. ProEFI | |
|
| |
is300lex
Posts : 5 Join date : 2008-04-03
| Subject: Re: CAN Gauge VQ35DE Sat Apr 19, 2008 9:28 pm | |
| - Pro EFI wrote:
- Glex25 wrote:
- When will it be available?
What features can be controlled from it apart from Antilag, Boost? 2-Step RPM Change? The 52mm gages are available. Feature content is still in developement for the gage, the basic settings you will be able to adjust through the gage are hi/low octane switch (which will change timing and boost), boost targets, Limiter changes, and the more simple things like that.
ProEFI would be great to adjust boost w/o the need for a ebc boost controller, or activate 2step etc.. Would get rid of alot of electronics in my car thats for sure which is great! Btw the gauge itself looks outdated IMO, will there a more modern looking gauge later on? With maybe full color? | |
|
| |
IIQuickSilverII
Posts : 6 Join date : 2008-03-06 Age : 44 Location : AZ
| Subject: Re: CAN Gauge VQ35DE Sat Apr 19, 2008 9:50 pm | |
| i think it looks pretty good....why would u want a color one? if youa re looking for looks, or something like that id check the PLX gauges... | |
|
| |
ND4SPD
Posts : 9 Join date : 2008-03-24 Age : 50
| Subject: Re: CAN Gauge VQ35DE Sun Apr 20, 2008 12:08 pm | |
| I can't wait to get the CAN Gauge into my Supra... my ProEFI is in and running, but it'd be nice to be able to get rid of my separate boost controller and be able to do the hi/low octane switching. Is the CAN gauge controlled completely by the ProEFI or does it have a separate processor and software? | |
|
| |
is300lex
Posts : 5 Join date : 2008-04-03
| Subject: Re: CAN Gauge VQ35DE Sun Apr 20, 2008 1:00 pm | |
| - IIQuickSilverII wrote:
- i think it looks pretty good....why would u want a color one? if youa re looking for looks, or something like that id check the PLX gauges...
Why a color display? well it is 2008 If one were to get the can gauge with its current ability how will upgrades work if more features become available? | |
|
| |
is300lex
Posts : 5 Join date : 2008-04-03
| Subject: Re: CAN Gauge VQ35DE Mon May 12, 2008 11:54 am | |
| btw is the can gauge currently unavailable? | |
|
| |
gbennett
Posts : 25 Join date : 2009-04-24
| Subject: Re: CAN Gauge VQ35DE Fri May 01, 2009 4:54 am | |
| Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge? | |
|
| |
Admin Admin
Posts : 258 Join date : 2008-02-22
| Subject: Re: CAN Gauge VQ35DE Wed Jun 03, 2009 8:25 am | |
| - gbennett wrote:
- Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?
You will be able to monitor the sensors going to the engine, as well as some calculated ones like injector duty, spark advance , etc... You will also get fault codes displayed in the gauge. Things you will be able to change are Traction control On/Off O2 Feedback On/Off High Low Octane On/Off Nitrous stages 1 through 4 Armed/Disarmed Two Step RPM increment/decrement by 100rpm Two Step target boost increment/decrement by 5kpa Some features may be added in the future as well. | |
|
| |
kaptain86
Posts : 7 Join date : 2009-09-07
| Subject: Re: CAN Gauge VQ35DE Tue Sep 08, 2009 4:42 pm | |
| - Admin wrote:
- gbennett wrote:
- Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?
You will be able to monitor the sensors going to the engine, as well as some calculated ones like injector duty, spark advance , etc... You will also get fault codes displayed in the gauge.
Things you will be able to change are
Traction control On/Off O2 Feedback On/Off High Low Octane On/Off Nitrous stages 1 through 4 Armed/Disarmed Two Step RPM increment/decrement by 100rpm Two Step target boost increment/decrement by 5kpa
Some features may be added in the future as well. Any updates on all the capabilities of the current can gauges? | |
|
| |
stugot5
Posts : 4 Join date : 2009-10-03
| Subject: Re: CAN Gauge VQ35DE Sat Oct 03, 2009 9:17 pm | |
| is there any type of manual that we can download for operating the CAN gauge? | |
|
| |
Admin Admin
Posts : 258 Join date : 2008-02-22
| Subject: Re: CAN Gauge VQ35DE Mon Oct 05, 2009 8:19 am | |
| - kaptain86 wrote:
- Admin wrote:
- gbennett wrote:
- Is there an updated feature list on the CAN gauge, or specifically, when you say limiters, do you mean like a "2-step" or "launch" limiter is controllable through the gauge?
You will be able to monitor the sensors going to the engine, as well as some calculated ones like injector duty, spark advance , etc... You will also get fault codes displayed in the gauge.
Things you will be able to change are
Traction control On/Off O2 Feedback On/Off High Low Octane On/Off Nitrous stages 1 through 4 Armed/Disarmed Two Step RPM increment/decrement by 100rpm Two Step target boost increment/decrement by 5kpa
Some features may be added in the future as well. Any updates on all the capabilities of the current can gauges? No changes to the capabilities as of yet. We are still sorting out a few bugs with the tuning menus. We are hoping to have that release soon. It will require a firmware update to the ECU to be performed by your dealer. | |
|
| |
Admin Admin
Posts : 258 Join date : 2008-02-22
| Subject: Re: CAN Gauge VQ35DE Mon Oct 05, 2009 8:21 am | |
| - stugot5 wrote:
- is there any type of manual that we can download for operating the CAN gauge?
No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it. | |
|
| |
kaptain86
Posts : 7 Join date : 2009-09-07
| Subject: Re: CAN Gauge VQ35DE Mon Oct 12, 2009 4:35 pm | |
| - Admin wrote:
- stugot5 wrote:
- is there any type of manual that we can download for operating the CAN gauge?
No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it. I played around with mine for a little bit when I test drove my car last thursday, I can take some video of it when I get my car back (should be in a few hours that I get it back then sometime will get video of it in action) | |
|
| |
Admin Admin
Posts : 258 Join date : 2008-02-22
| Subject: Re: CAN Gauge VQ35DE Tue Oct 25, 2011 10:18 am | |
| - kaptain86 wrote:
- Admin wrote:
- stugot5 wrote:
- is there any type of manual that we can download for operating the CAN gauge?
No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it. I played around with mine for a little bit when I test drove my car last thursday, I can take some video of it when I get my car back (should be in a few hours that I get it back then sometime will get video of it in action) Keep us posted. | |
|
| |
kaptain86
Posts : 7 Join date : 2009-09-07
| Subject: Re: CAN Gauge VQ35DE Tue Oct 25, 2011 10:27 am | |
| - Admin wrote:
- kaptain86 wrote:
- Admin wrote:
- stugot5 wrote:
- is there any type of manual that we can download for operating the CAN gauge?
No manual for the Can gauge as of yet. It's pretty self explanitory, you have the gauge menu, select and cycle up or down through the signals. Tuning menue/select, and cycle up and down through the tuning parameters, select the one you want to modify, cycle up and down to select the change. Fault menu/select, and it will display any active faults. That's pretty much it. I played around with mine for a little bit when I test drove my car last thursday, I can take some video of it when I get my car back (should be in a few hours that I get it back then sometime will get video of it in action) Keep us posted. https://www.youtube.com/watch?v=5s___abzN4Ahttps://www.youtube.com/watch?v=unohHzb-L1sI haven't gone through all the selections of it but it at least shows start up. | |
|
| |
Admin Admin
Posts : 258 Join date : 2008-02-22
| Subject: Re: CAN Gauge VQ35DE Tue Oct 25, 2011 10:36 am | |
| | |
|
| |
Sponsored content
| Subject: Re: CAN Gauge VQ35DE | |
| |
|
| |
| CAN Gauge VQ35DE | |
|