ProEFI

Electronic Fuel Injection Discussion Forums
 
HomeFAQSearchRegisterUsergroupsLog in

Share | 
 

 Oil Pressure sensor install

View previous topic View next topic Go down 
AuthorMessage
6ick6



Posts : 4
Join date : 2011-06-13

PostSubject: Oil Pressure sensor install   Tue Aug 30, 2011 2:15 pm

Hi guys, any best way to wire in the oil pressure sensor?

I know it uses the J1C02. Do I simply run a wire from sensor to that pin and use a common ground or can I tap into an existing wire in the harness?


Back to top Go down
View user profile
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: Oil Pressure sensor install   Tue Oct 25, 2011 10:12 am

6ick6 wrote:
Hi guys, any best way to wire in the oil pressure sensor?

I know it uses the J1C02. Do I simply run a wire from sensor to that pin and use a common ground or can I tap into an existing wire in the harness?



You want to use an existing SENSOR ground, and existing 5v reference. You can piggy back as many sensors as you need to these wires.
Back to top Go down
View user profile http://proefiforum.forumakers.com
 
Oil Pressure sensor install
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Oil leak from oil pressure sensor wire hole
» LS3 Harness pin outs
» TPMS vs Inspections???
» A/C switch pinout
» Fuel pressure sensor allocation

Permissions in this forum:You cannot reply to topics in this forum
ProEFI :: ProEFI Forums :: Applications :: Toyota/Lexus/Scion-
Jump to: