ProEFI

Electronic Fuel Injection Discussion Forums
 
HomeFAQSearchRegisterUsergroupsLog in

Share | 
 

 experience with 2UZ and 1UZ w/ vvti?

View previous topic View next topic Go down 
AuthorMessage
turboandrew



Posts : 3
Join date : 2010-10-20

PostSubject: experience with 2UZ and 1UZ w/ vvti?   Wed Oct 20, 2010 6:42 pm

Just wanted to know if you have any 2UZ or 1UZ motors w/ vvti running well before I bite the bullet and purchase a ProEFI 128. Universal plug/pin kit is fine for me as long as I can get a pin assignment documentation. Thanks! -Andrew
Back to top Go down
View user profile
turboandrew



Posts : 3
Join date : 2010-10-20

PostSubject: Re: experience with 2UZ and 1UZ w/ vvti?   Thu Dec 30, 2010 6:54 am

2 months and no reply. Is there another forum where ProEFI is discussed?
Back to top Go down
View user profile
Admin
Admin


Posts : 258
Join date : 2008-02-22

PostSubject: Re: experience with 2UZ and 1UZ w/ vvti?   Sun Jan 09, 2011 6:15 pm

turboandrew wrote:
2 months and no reply. Is there another forum where ProEFI is discussed?

I can't say that I know that engine family's timing pattern. What is on the crank and on the cam? More than likely it isn't a problem.
Back to top Go down
View user profile http://proefiforum.forumakers.com
turboandrew



Posts : 3
Join date : 2010-10-20

PostSubject: Re: experience with 2UZ and 1UZ w/ vvti?   Mon Jan 10, 2011 6:25 pm

I think the crank is 36-2, but not sure about the cams yet. There are multiple sensors to detect cam timing for vvti. I will get a service manual and see what this is.
Back to top Go down
View user profile
cyberdiamond

avatar

Posts : 3
Join date : 2010-01-16
Location : Adelaide, Australia

PostSubject: Re: experience with 2UZ and 1UZ w/ vvti?   Thu Feb 17, 2011 5:39 pm

Yes crank is 36-2 and cam is 5-2

Jason my proefi is for a 1UZ VVTi so you should have the setup for it.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: experience with 2UZ and 1UZ w/ vvti?   

Back to top Go down
 
experience with 2UZ and 1UZ w/ vvti?
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» 85 944 with a 4g63 Turbo swap

Permissions in this forum:You cannot reply to topics in this forum
ProEFI :: ProEFI Forums :: Applications :: Toyota/Lexus/Scion-
Jump to: