ProEFI


Electronic Fuel Injection Discussion Forums
 
HomeFAQSearchRegisterUsergroupsLog in

View unanswered posts
 

Files/Downloads

 
TopicsPosts
Last Posts
This forum is locked: you cannot post, reply to, or edit topics.

FIRMWARE


(.SRZs and matching .DLLs) Currently supported ECU versions: V3, V4, (V5 beta)

Firmware for all ancillary devices.

Support for beta versions MUST BE HANDLED BY SUPPLYING DEALER. If you choose to use a beta version on your own (without being supplied directly by a supporting dealer) you do so at your own risk!

Pre V3 firmwares are no longer supported. If you have a pre V3 firmware, you will need to either get a new base map and re-tune with a V3 or greater firmware, or you will need to have a dealer upgrade your existing version. Costs for upgrading from a pre V3 to a newer firmware by a dealer may be incurred, as it is a lengthy manual process.

00
This forum is locked: you cannot post, reply to, or edit topics.

SOFTWARE


Current Versions of Software will be posted here. Be sure to always use the latest version of software!
00
This forum is locked: you cannot post, reply to, or edit topics.

BASEMAPS


Although not 100% necessary, it is best to use a base map that shares the same firmware version. IE, V3 basemap with V3 firmware.

These are BASE CALIBRATIONS! not intended to be raced on. Use these only as a starting point towards a full tune.

00
This forum is locked: you cannot post, reply to, or edit topics.

PCAL (Partial Calibrations)


This area is where you will find PCALs. A PCAL is a partial calibration file that can be imported into a full calibration to quickly load settings for various sensors or functions.
00
This forum is locked: you cannot post, reply to, or edit topics.

DOCUMENTATION

INSTRUCTIONS | WRITE-UPS | VIDEOS | PIN-OUTS | WIRING DIAGRAMS

00
Today's active topics
Today's top 20 posters
Overall top 20 posters

New postsNew postsNo new postsNo new posts  Forum is lockedForum is locked